Why Custom Sizing Exists
Standard bathroom vanity sizes — 24, 30, 36, 48, 60, 72 inches — exist because that is what the production line can efficiently produce at volume. Your bathroom does not know about production lines. An alcove that is 47 inches wide, or a wall run that is 63 inches, does not become a 48 or 60-inch space because the catalog says so. You either fill the space with the right fixture or you accept filler strips, gap lines, and the visual evidence that the vanity was not designed for the room it is in.
Vanderloc bathroom vanities are American-made custom fixtures built to any width from 24 to 96 inches in one-inch increments. Yala Vanity is an authorized Vanderloc dealer offering the full custom-width lineup with free shipping to the contiguous USA.
Measuring for a Custom-Width Vanity
The width you order is the cabinet width — the outside dimension of the vanity box. Measure the alcove or wall span at its narrowest point, then subtract the clearance you want on each side. For an alcove installation (vanity flanked by walls on both sides), 1/4 to 1/2 inch of clearance on each side is appropriate — enough to maneuver the cabinet into position without scraping walls. For a vanity against a single wall with open space on one or both ends, width is determined by design intention rather than clearance requirements.
Measure at the floor, mid-cabinet height, and near the counter height if the wall runs aren't perfectly plumb. Old houses and renovation projects frequently have walls that are out of plumb by 1/4 to 1/2 inch over a 5-foot span. Use the narrowest measurement. If the wall is significantly out of plumb, a scribe trim piece applied at the wall end handles the gap more cleanly than building the vanity to the wider measurement and ending up with a gap at the other end.
The Production and Delivery Timeline
Vanderloc vanities are made to order in the USA. From order confirmation to shipment is approximately 21 business days. Add transit time — typically 3 to 10 business days depending on destination — for total order-to-delivery time of roughly 5 to 7 weeks. Plan your renovation timeline around this. If the floor tile goes down before the vanity arrives, that is fine. If the tile contractor is waiting on the vanity to complete their work, order ahead.
Vanderloc ships freight on larger pieces. Freight delivery means a carrier will contact you to schedule a delivery appointment — someone needs to be present to receive. Delivery is typically to a point accessible to the truck (driveway or accessible area near the entrance), not necessarily inside the home. Have a plan for getting the crated vanity from the delivery point to the bathroom before the installation day.
What to Confirm Before Ordering
Width (measured and confirmed), wall-mount or freestanding, finish selection (Rift White Oak, painted option), countertop selection (Silestone quartz options or custom countertop coordination), and hardware finish. Also confirm rough-in dimensions for plumbing if ordering a wall-mounted configuration — supply lines and drain center should be within the planned cabinet depth and width.
The Yala Vanity team reviews all Vanderloc orders before submission to confirm the configuration is complete and the dimensions are coherent. We have caught measurement errors and configuration gaps before they became lead-time and restocking problems. It is part of what the team does for custom-order buyers.
See the full Vanderloc brand overview for more context on the brand and product line. Browse the Vanderloc collection at Yala Vanity to see configuration options side by side.
Frequently Asked Questions
- What is the minimum and maximum width for a Vanderloc vanity?
- Vanderloc vanities are available in any width from 24 to 96 inches in one-inch increments. Single-sink configurations typically run 24 to 48 inches; double-sink configurations are typically 48 to 96 inches. Both wall-mounted and freestanding versions are available at all standard widths.
- How long does a Vanderloc custom vanity take to arrive?
- Approximately 21 business days production plus 3 to 10 business days shipping, for a total of 5 to 7 weeks from order confirmation to delivery. This is custom American manufacturing, not warehouse fulfillment. Plan your renovation timeline accordingly.
- Can I change my Vanderloc order after it has been submitted?
- Changes may be possible early in the production process but are not guaranteed once production has begun. Contact the Yala Vanity team immediately if you need to modify an order. Changes after the 48-hour confirmation window may not be accommodated, or may involve restocking and reorder fees.
- Does Yala Vanity offer guidance on Vanderloc configurations before ordering?
- Yes. Our team reviews all Vanderloc orders and is available to discuss width, configuration, finish, and countertop options before you commit. Reach out before ordering if you have questions about fit, finish matching, or configuration — it is much easier to adjust the plan before the order is placed than after.
Written by the Yala Vanity team — curators of luxury bathroom fixtures for discerning homeowners and design professionals. Questions? Our team offers personalized guidance for your renovation.
